TheCheck-LineTI-CMXaccuratelymeasurescoatingandwallthicknessonawiderangeofmaterials

產(chǎn)品型號：

更新時間：2024-06-26

廠商性質(zhì)：代理商

訪問量：141

產(chǎn)品咨詢 13352927502

詳細(xì)介紹在線留言

The Check-Line TI-CMX accurately measures coating and wall thickness on a wide range of materials. Five selectable measuring modes enable the operator to precisely measure wall thickness, coating thickness and locate corrosion and pitting—without removing the coating.

Oversized graphic LCD is backlit and features an easy to navigate menu allowing quick access to gauge settings and options.

Five user-selected operating modes are included:

Coating On: Measures wall thickness using Pulse-Echo. It separately displays wall & coating thickness.

Coating Off: Measures wall thickness using Pulse-Echo. It displays wall thickness only.

Temperature Compensated: Measures wall thickness using Pulse-Echo and automatically adjusts calibration to compensate for changes in material temperature.

Thru-Coat: Measures wall thickness only using Echo-Echo. (coating is NOT included)

Coating Only Mode (CT): (Coating Thickness) Measures from 0.0005 to 0.100 inches (0.013 to 2.540 mm). Range will vary slightly depending on the coating.

Includes NIST-Traceable Calibration Certificate
Auto probe recognition with Auto Zero or Manual Zero.
Wide variety of dual-element probes can be used for nearly any application.
Bar graph with user-set start end values providing highest resolution around the target thickness value.
Differential Mode allows user to set a "target thickness value" and display will show the DIFFERENCE between actual and target thickness as a plus or minus value.
TI-CMX-H for surface temps up to 300°F/150°C. Optional hi-temp probes for higher surface temperatures offered
Adjustable Gain in 5 steps (VLow, Low, Med, Hi & VHi) in 2db increments providing a 8 db gain adjust range (42–50 db).
64 custom setups can be stored and retrieved for convenient use and labeled for easy identification
Display Hi/Lo Alarm Limits with audible and visual indicators.
2 Year Warranty & CE-Certified
Metal housing provides strong protection against harsh environments.
Measures Coatings up to 0.100"
IP 65 Rated

Range in Steel:	Pulse-Echo Mode: Pit and Flaw detection measures from 0.025 - 9.999inches (0.63 to 254 millimeters) Echo-Echo Mode: Thru Paint & coatings measures from 0.100 - 4.000 inches (2.54 to 102 mm). Range will vary depending on the thickness
Range in Coating Only Mode	0.0005" - 0.1000" / Resolution: 0.0001" (0.013 - 2.540 mm / Resolution: 0.001 mm)
Max Coating	0.100" (2.54mm)
Resolution:	.001 inches (0.01mm)
Velocity Range:	.0492 to .3936 in./ms 1250 to 9999 meters/sec
Units:	Inch or mm
Measurement Modes:	- Pulse-Echo (corrosion mode) - Pulse-Echo Coating (Corrosion w/o coating) - Echo-Echo (thru-paint) - Temp Comp (auto adjust for material temp) - Coating Only (Ultrasonic Coating Gauge)
Transducer Types:	Dual Element (1 to 10 MHz).
Output	RS-232 for upload/download of setups
Memory capacity:	TI-CMX: None TI-CMXDL: over 200,000 measurements
Power Source:	Three 1.5V alkaline or 1.2V NiCad AA cells
Battery Life:	Typically operates for 150 hours on alkaline and 100 hours on NiCad
Auto Power off:	After 5 minutes of non-use
Display:	1/8 in. VGA grayscale display 62 x 45.7mm
Keyboard:	Membrane switch with twelve tactile keys
Case:	Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
Temp. Limits	Ambient: -20 to 120° F (-30 to 50° C) Material: -0 to 200° F (-20 to 100° C) Special high temperature model TI-CMX-H is available for 300°F/150°C and optional probes are offered for higher surface temperatures
Weight, net:	383 grams
Dimensions:	63.5 W x 165 H x 31.5 D mm
Warranty:	2 year limited
Certification:	CE Approved, Factory calibration traceable to national standards

訂貨清單

The Checkline TI-CMX is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST-Traceable Calibration Certificate, operating manual, Software, RS-232 output cable, RS-232 to USB adapter, all in a foam-fitted carrying case.

配件

TICC-MVX Protective Holder for TI-MVX, TI-PVX and TI-MMX-SDL

V-Block V-Block Transducer Holder (For 3/16" & 1/4" Transducers only)

CF12 Coupling Fluid - 12oz

CF-4H High Temp Coupling Fluid 4oz (0 - 600 F / -18 to 316 C)

CF-4H-950F High Temp Coupling Fluid 4oz (600 - 950 F / 316 - 510 C)

T-102-2900 1/4" diameter, 5.00 MHz Coating Probe (Standard Probe for TI-CMX)

T-104-2900 1/2" diameter, 5.00 MHz Coating Transducer

T-104-9900 1/2" diameter, 3.5 MHz Coating Transducer

T-102-2900-H 1/4" 5Mhz Coating Transducer for Material Temp up to 300 °F (150 °C)

T-101-2900 3/16" diameter, 5 MHz Coating Probe

T-101-3900 3/16"-7.5MHz Coating Transducer