Wherepowerfulilluminationandruggedspeedmeasuringaccuracyisrequiredforthetextileindustry,theshimpoDT-311Jwillperformwhereotherstroboscopeswillnot

產品型號：

更新時間：2024-06-26

廠商性質：代理商

訪問量：140

產品咨詢 13352927502

詳細介紹在線留言

Where powerful illumination and rugged speed measuring accuracy is required for the textile industry, the shimpo DT-311J will perform where other stroboscopes will not. The DT-311J is used to set injection timing, injection pressure, timing of shedding and weft running time of weaving machinery. Units combine rugged NEMA 4X (IP65) housing with high performance accuracy, special phase shifting, with shock absorbing components and top mounted handle, allows the equipment operator maximum flexibility when setting the timing of weaving machinery.

Internal signal “MODE" (flash), allow manual control and display of flash rate (rpm), deg (flash delay angle in degrees)
External triggering control, automatically synchronizes to an input signal
Phase “SHIFT" switch, single touch – changes flash timing, 0 – 359 degrees
“ZERO" setting control, zeroing at any angle is easy-single touch
Long life flashtubes, flash rates of 200-1500 fpm, the DT-311J flash tubes are designed for extra long life
Angle division “DIV", permits special flash interval ratio settings: 1/1, 1/2, 1/3, 1/4, and 2/4 flashes per rotation

Model	DT- 311J
Phase Shift	0° – 359° / 1° increments
Flash Rate/Phase Angle Setter	Rotary dial
Display	4 digit 0.39 in (10 mm) high red LED
Divide Ratio	1/1, ?, 1/3, ?, 2/4 with shift
Input Signal	High level: 5-24 V pulse; Low Level: 0-1 V pulse. 2 msec minimum. Impedance less than 10k Ω
Input Impedance	47k
Display Mode	Phase shift (degree), Tachometer
Accuracy	±1 digit
Internal Signal Range	200-1500 FPM
Flash Range	200-1500 FPM
FlashTube	Xenon lamp Max: 10w at 1,500 rpm. Life: 1,200 hours at 1,500 rpm
Flash Duration	10 to 40 μs automatically adjusts with flash rate
Lux Rating	8" (20 cm) Distance = 4500 lx @ 1500 fpm, 3375 lx @ 6000 fpm with 4.5″ (110 mm) irradiation diameter. 20" (50 cm) Distance = 1300 lx @ 1500 fpm, 930 lx @ 6000 fpm with 10″ (250 mm) irradiation diameter.
Power Requirement	115VAC±5% 50/60Hz
Power Consumption	20VA max
Operating Temperature	32° to 104°F (0 to 40°C)
Dimensions	N/A
Product Weight	4.2 lbs (1.9 kg)
Package Weight	6.2 lbs (2.81 kg)
Warranty	2-Year
Included Accessories	19.68’ (6m) input/power cable with connector, rubber strobe guard w/ handle

訂貨型號

DT-311J	Harsh Environment NEMA 4X (IP65) Stroboscope with Included power 19.68’ (6m) cable, rubber strobe guard with handle
DT-311J-230V	Same as 311J but with 230 VAC power
NIST-STROBE	NIST traceable certificate with data

配件

FLASHTUBE311-J

Replacement flash tube for DT-311J

相關型號

DT-311A

DT-315A

DT-361

DT-365

DT-365E

DT-315AEB

DT-315P

DT-326B