3123A加速度傳感器

產品簡介

壓電式加速度傳感器，又稱振動傳感器，是基于壓電晶體的壓電效應工作的

產品型號：

更新時間：2024-06-26

廠商性質：代理商

訪問量：139

產品咨詢 13352927502

詳細介紹在線留言

壓電式加速度傳感器，又稱振動傳感器，是基于壓電晶體的壓電效應工作的。某些晶體在一定方向上受力變形時，其內部會產生極化現象，同時在它的兩個表面上產生符號相反的電荷；當外力去除后，又重新恢復到不帶電狀態，這種現象稱為“壓電效應"，具有“壓電效應"的晶體稱為壓電晶體。常用的壓電晶體有石英、壓電陶瓷等，在現代生產生活中被應用于許許多多的方面，如手提電腦的硬盤抗摔保護，目前用的數碼相機和攝像機里，也有加速度傳感器，用來檢測拍攝時候的手部的振動，并根據這些振動，自動調節相機的聚焦。壓電加速度傳感器還應用于汽車安全氣囊、防抱死系統、牽引控制系統等安全性能方面。

美國Dytran的3123A是一款微型加速度傳感器/振動傳感器，適用于振動實驗室，轉配電動振動器和控制系統使用。

The Dytran 3123A is a double ended IEPE reference (comparison) accelerometer, offering a convenient means of determining the sensitivity and frequency response characteristics of unknown acceleration, velocity and displacement sensors. A vibration laboratory already equipped with an electrodynamic shaker and control system can easily incorporate use of the model 3123A to accomplish in-house NIST traceable calibrations. Model 3123A offers a 100 mV/g sensitivity, and mounts to a shaker head via a 10-32 tapped hole.

Back-to-back comparisons with a double ended calibration standard accelerometer, such as the Dytran model 3123A, entails mounting the test accelerometer directly to the top mounting surface of the calibration standard (model 3123A) and driving the coupled pair with an electrodynamic shaker system at various frequencies and amplitudes. At each test frequency, the amplitude is set and the corresponding output read from the test accelerometer. To form a complete measurement system, the user will need to supply the cables, power supply unit and electrodynamic shaker system. The model 3123A should be used for low frequency, low g level measurements.

特性

1. 100 mV/g sensitivity

2. 50g range

3. 10 to 5,000 Hz frequency range (±2%)

4. 10-32 radial connector

5. 10-32 tapped holes, top and bottom

6. 100 grams

7. Stainless steel

8. Calibration standard accelerometer

9. IEPE

應用

1. Back-to-back accelerometer calibration

連續加速度校準

2. Low frequency, low g level measurements

低頻、低g值水平測量

3. NIST traceable calibrations (when used with appropriate electrodynamic shaker, power supply and control system)

NIST可追蹤式標定（當與電動振動器，電源和控制系統一起使用時）

SYSTEM SPECIFICATIONS VALUE UNITS

SYSTEM SENSITIVITY @ 100 Hz [1] 100.00 ±1.0 mV/G

FREQUENCY RESPONSE, ±2% [1] 10 to 5,000 Hz

LINEARITY ± 1 % F.S.

RANGE F.S. FOR 5 VOLTS OUT ± 500 G

OPERATING FORCE RANGE [2] ± 10 Force-pounds

EQUIVALENT ELECTRICAL NOISE, (BROADBAND) .003 G, RMS

OUTPUT IMPEDANCE 2 Ohms

ACCELEROMETER MODEL 3123A SPECIFICATIONS

SENSITIVITY, ±5% 100 mV/G

DISCHARGE TIME CONSTANT 0.5 to 1.5 Sec

COEFFICIENT OF THERMAL SENSITIVITY .03 %/°F

TEMPERATURE RANGE -60 to +200 °F

TRANSVERSE SENSITIVITY, MAX 3 %

ELECTRICAL CONNECTOR, RADIAL 10-32 COAXIAL Jack

MOUNTING HOLES, TOP & BOTTOM 10-32 UNF-2B

MAXIMUM SHOCK 3000 G

MATERIAL (NON-MAGNETIC) 300 SERIES STAINLESS STEEL

BIAS VOLTAGE +7.5 to +9.5 VDC

SUPPLY CURRENT (CONSTANT CURRENT) 2 mA

COMPLIANCE VOLTAGE +20 VDC

WEIGHT 3.5/100 oz/grams

AMPLIFIER/POWER UNIT 4119B SPECIFICATIONS

SENSOR SUPPLY CURRENT/VOLTAGE, STD 2/+20 mA/VDC

FILTER, LOW PASS, ACTIVE VCVS 12 db/octave

SENSOR/OUTPUT CONNECTOR BNC/BNC Coaxial jack

INPUT POWER, STD MODEL, 115 VAC 2.4 VA

INPUT POWER, 'E' MODEL, 230 VAC 2.4 VA

POWER CORD, STD 6 FT 3-WIRE W/CHASSIS GND

WEIGHT 32/900 oz/grams

SIZE (H x W x D) [3] 5.5 x 1.6 x 8.0 Inches

(H x W x D) [3] 140 x 41 x 203 mm

TEMPERATURE RANGE 0 to +120 ° F

訂貨型號

3123A

配件

Supplied Accessories: (1) model 6200 mounting stud (10-32 to 10-32)

Recommended Accessories: model 4010C current source power unit, model 6213 adhesive mounting base

Compatible Cables: 6010A, 6011A, 6012A, 6016A, 6018A, 6022A, 6026A, 6032A, 6033A, 6049A, 6050A, 6051A, 6053A, 6054A, 6066A, 6069A, 6093A, 6099A, 6400A, 6401A, 6412A, 6429A, 6924A, 6930A, 6991A

相關型號

3120B

3128A

3123A 01.jpg