3056D加速度傳感器

產品簡介

IEPE是指一種自帶電量放大器或電壓放大器的加速度傳感器

產品型號：

更新時間：2024-06-26

廠商性質：代理商

訪問量：408

產品咨詢 13352927502

詳細介紹在線留言

IEPE是指一種自帶電量放大器或電壓放大器的加速度傳感器。IEPE是壓電集成電路的縮寫。因?yàn)橛杉铀俣葌鞲衅鳟a(chǎn)生的電量是很小的，因此傳感器產生的電信號很容易受到噪聲干擾，需要用靈敏的電子器件對其進行放大和信號調理。IEPE中集成了靈敏的電子器件使其盡量靠近傳感器以保證更好的抗噪聲性并更容易封裝。

美國Dytran的3056D8是一款I(lǐng)EPE加速度傳感器/振動傳感器，靈敏度5mV/g，集成陶瓷剪切感應元件，鈦合金外殼，應對潮濕和多塵的惡劣工作環境。

The Dytran model 3056D8 is a cost effective, single axis IEPE accelerometer offered with a sensitivity of 5 mV/g.

Design of the Dytran 3056D8 features a ceramic shear sensing element packaged within a rugged titanium housing, and incorporates a 10-32 axial connector and 10-32 stud mounting capabilities. Model 3056D7 is base isolated to avoid EMI/ground loop interference and incorporates low noise JFET electronics. Units are also hermetically sealed for reliable performance in high humidity and dirty environments.

特性

1. 5 mV/g sensitivity

2. 1,000g range

3. 1 to 10,000 Hz frequency range (±10%)

4. 10-32 axial connector

5. 10-32 tapped hole

6. 10 grams

7. Titanium

8. Hermetically sealed

9. Base isolated

10. IEPE

應用

1. Modal analysis

模態分析

2. Vibration control

振動控制

3. General purpose vibration monitoring

一般用途振動監測

Weight 0.35 oz 10 grams

Connector Type 10-32 10-32

Sensitivity, ±5% [1] 5 mV/G 0.5 mV/m/s2

Range for ± 5 Volts Output 1,000 G peak 9810 m/s2

Frequency Response, ±10% 1 to 10,000 Hz 1 to 10,000 Hz

Resonant Frequency > 36 kHz > 36 kHz

Broad Bａnd Resolution 0.008 G rms 0.08 m/s2 rms

Linearity [2] ±1 % F.S. ±1 % F.S.

Maximum Transverse Sensitivity 5 % 5 %

Strain Sensitivity @ 250με 0.001 G/με 0.01 m/s2/με

ENVIRONMENTAL

Maximum Vibration 600 G peak 5886 m/s2 peak

Maximum Shock 3000 G peak 29430 m/s2 peak

Temperature Range -67 to 250 °F -55 to 121 °C

Seal HERMETIC HERMETIC

ELECTRICAL

Supply Current Range [3] 2 to 20 mA 2 to 20 mA

Compliance Voltage Range +18 to +30 Volts +18 to +30 Volts

Output Impedence,Typ 100 Ω 100 Ω

Bias Voltage +9 to +13 VDC +9 to +13 VDC

Discharge Time Constant .5 to 1.5 Sec .5 to 1.5 Sec

Electrical Isolation 10 GΩ,min 10 GΩ,min

訂貨型號

型號	靈敏度(mV/g)	頻率響應(Hz)	時間常數（秒）	工作溫度(°F)
3056D1	10	1 - 10000	0.5 – 1.5	-67 - +250
3056D2	100	1 - 10000	0.5 – 1.5	-67 - +250
3056D3	500	1 - 10000	0.5 – 1.5	-67 - +250
3056D4	20	1 - 10000	0.5 – 1.5	-67 - +250
3056D5	50	1 - 10000	0.5 – 1.5	-67 - +250
3056D6	200	1 - 10000	0.5 – 1.5	-67 - +250
3056D7	1	1 - 10000	0.5 – 1.5	-67 - +250
3056D8	5	1 - 10000	0.5 – 1.5	-67 - +250

配件

1. Model 6200 mounting stud (10-32 to 10-32)

2. Model 4110C current source power unit, model 6196 magnetic mounting base, model 6213 adhesive mounting base

3. 配套電纜線：6010A, 6011A, 6012A, 6016A, 6018A, 6022A, 6026A, 6032A, 6033A, 6049A, 6050A, 6051A, 6053A, 6054A, 6066A, 6069A, 6093A, 6099A, 6400A, 6401A, 6412A, 6429A, 6924A, 6930A, 6991A

相關型號

3056D1T (TEDS)

3056D2T (TEDS)

3056D3T (TEDS)

3056D4T (TEDS)

3056D5T (TEDS)

3056D6T (TEDS)

3056D7T (TEDS)

3056D8T (TEDS)

3056B

3056C（高溫型）

3056D8 01.png