3187D加速度傳感器

產品簡介

IEPE是指一種自帶電量放大器或電壓放大器的加速度傳感器

產品型號：

更新時間：2024-06-26

廠商性質：代理商

訪問量：121

產品咨詢 13352927502

詳細介紹在線留言

IEPE是指一種自帶電量放大器或電壓放大器的加速度傳感器。IEPE是壓電集成電路的縮寫。因為由加速度傳感器產生的電量是很小的，因此傳感器產生的電信號很容易受到噪聲干擾，需要用靈敏的電子器件對其進行放大和信號調理。IEPE中集成了靈敏的電子器件使其盡量靠近傳感器以保證更好的抗噪聲性并更容易封裝。

美國Dytran的3187D是一款I(lǐng)EPE加速度傳感器/振動傳感器，靈敏度500mV/g，頻響低，低至0.48Hz。

The Dytran 3187D is an IEPE accelerometer with a sensitivity of 500 mV/g and an excellent low frequency response of 0.48 Hz.

Design of the model 3187D incorporates an annular shear ceramic sensing element, packaged in a highly rugged stainless steel housing with a 2-pin MIL-C-5015 axial connector. The model 3187D is designed to be directly compatible with the Dytran model 6194 Immersion Proof boot. When used together, the sensor remains fully functional in an IP65 environment. The model 3187D is hermetically sealed for reliable operation in high humidity and dirty environments and case isolated to avoid EMI/ground loop interference.

特性

1. 500 mV/g sensitivity

2. 10g range

3. 0.48 to 1,000 Hz frequency range (±5%)

4. 2-pin axial connector

5. 1/4-28 tapped hole

6. 122 grams

7. Stainless steel

8. Hermetic

9. Case isolated

10. Available with water and oil resistant environmental boot

11. IEPE

應用

1. Industrial vibration monitoring

工業振動監測

2. Low frequency vibration measurements

低頻振動測量

3. Walkabout data collection

徒步旅行數據收集

4. General purpose vibration monitoring

一般用途振動監測

WEIGHT 122 GRAMS

SIZE, HEX x HEIGHT 1.00 x 2.02 IN

MOUNTING PROVISION, (STUD PROVIDED) 1/4-28 TAPPED HOLE IN BASE x .20 DEEP

ELECTRICAL CONNECTOR, TOP MOUNTED MS3102A-10SL-4P 2-PIN MILITARY

MATERIAL CASE/CONNECTOR 316L ST. STEEL

PERFORMANCE

SENSITIVITY +/- 5% [1] 500 mV/G

RANGE FOR +/- 5 VOLTS OUT +/-10 G

FREQUENCY RESPONSE, +/- 5% .48 to 1000 Hz

FREQUENCY RESPONSE, - 3db FREQUENCIES .16 and 3000 Hz

MOUNTED RESONANT FREQUENCY >15 kHz

EQUIVALENT ELECTRICAL NOISE FLOOR (resolution) .00002 G RMS

AMPLITUDE NON-LINEARITY (ZERO BASED BEST FIT ST.LINE METHOD) 2.0 % F.S., MAX.

TRANSVERSE SENSITIVITY, MAX. 5 PERCENT

STRAIN SENSITIVITY .001 G's PER MICROSTRAIN @ 250/??

ENVIRONMENTAL, both models

MAXIMUM VIBRATION 20 G's, RMS

MAXIMUM SHOCK 3000 G's, PEAK

TEMPERATURE RANGE -60 TO +250 oF

ENVIRONMENTAL SEAL GLASS TO METAL/WELDED, HERMETIC

SUBMERSIBLE OPTION--UNIT MAY BE TOTALLY SUBMERGED WHEN USED WITH MODEL 6194 IMMERSION PROOF BOOT.

ELECTRICAL

COMPLIANCE (SUPPLY) VOLTAGE RANGE [2] +18 to +30 VDC

EXCITATION CURRENT RANGE 2 to 10 mA

OUTPUT IMPEDANCE, NOM. 200 OHMS

OUTPUT BIAS VOLTAGE, +/-1 VOLT 12.5 VDC

DISCHARGE TIME CONSTANT 0.9 to 2.0 SEC.

OUTPUT SIGNAL POLARITY FOR ACCELERATION TOWARD TOP POSITIVE GOING

POWER/SIGNAL GROUND TO CASE ISOLATION, MIN. 10 MEGOHMS

訂貨型號

3187D

配件

1. Model 6176 mounting stud (1/4-28 to 1/4-28)

2. Model 4110C current source power unit, model 6186 adhesive mounting base, model 6187 magnetic mounting base, model 6190 magnetic mounting base, model 6194 protective boot

相關型號

3184E

3185D

3187D 01.png